Communication Line Connection - Samsung SSA-P400 User Manual

installation and external connection

COMMUNICATION LINE CONNECTION

RS-232 Communication Port Connection
A 9-pin connector for serial communication is required to make connection to the PC.
Connect the 9 pin connector for RS-232 communications as follows:
HOST PC
RS-232
2
3
5
9-Pin Female Connector
1. Connect RS-232 TX to pin #2 of the 9-pin connector.
2. Connect RS-232 RX to pin #3 of the 9-pin connector.
3. Connect RS-232 GND to pin #5 of the 9-pin connector.
4. Connect the serial communication connector to the serial COM port of the computer.
5. Install and launch the application (SAMS).
- Check the location of the communication port.
18_
installation and external connection
GND
RX
TX