Mini Remote Control
The Mini Remote Control is a simplified remote control that consists of the power,
■
channel and volume buttons only.
1
Television Standby button.
■
This button only works when you press it for longer than 1.5 seconds.
2
< : Next channel / > : Previous channel
3
+ : Volume up / – : Volume down
4
IrDA transmitter
■
Use the Mini Remote Control so that this part faces the TV.
Installing Batteries in the Remote Control
1
Lift the cover at the back of the remote control upward as shown in the figure.
2
Install two AAA size batteries.
■
Make sure to match the '+' and '–' ends of the batteries with the diagram inside
the compartment.
3
Replace the cover.
■
Remove the batteries and store them in a cool, dry place if you won't be using
the remote control for a long time. (Assuming typical TV usage, the batteries
should last for about one year.)
1
Turn the battery cover counterclockwise to unlock it and then separate the battery
cover.
2
Insert the corresponding 3V Lithium battery.
3
Place the battery cover into the remote control aligning it with the grooves and then
turn the battery cover clockwise to lock the cover.
■
If the remote control doesn't work, check the following:
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?
Normal Remote Control
OPERATION
Mini Remote Control
OPERATION
4
1
2
3
3
2
OPEN
CLOSE
1