HP B1476 68020 User Manual page 633

143 Miscellaneous note.
All available information is displayed on the screen. Any one of a number of
notice messages may be displayed on your screen.
145 Too many interrupts pending.
Too many Program Interrupt commands have been given without a sufficient
number of interrupts being processed. The current limit on pending interrupts
is 16.
146 Voids have no value.
This error message is returned when certain commands are attempted on voids.
147 Invalid suboption.
This suboption does not work with this command. Refer to the "Debugger
Commands" chapter of this manual for valid suboptions for various commands.
148
Invalid option.
This option does not work with this command. Refer to the "Debugger
Commands" chapter of this manual for valid options for various commands.
149
No temporary breakpoints for the macro.
The command Program Run From < addr> ;< macro> will return this error
because a temporary breakpoint has not been specified.
150 Invalid type for this argument, expecting a target address.
The command was expecting an address. Re-enter the command with a target
memory address.
151
Invalid type for this argument, expecting a number.
The command was expecting a number. Re-enter the command with a number.
152
Cannot delete more than one symbol with this name.
Multiple symbols with the same name exist. More fully qualify the symbol to
make it unique and then retry the command.
Chapter 16: Debugger Error Messages
609