Escort SmartRadar Manual page 12

AutoMute
*aMute ON
Audio alerts are initially set to the volume level you selected; however, after a few seconds, the
audio level is automatically reduced to keep you informed but not annoyed.
aMute OFF
Audio alerts remain at the volume you set for the duration of the encounter.
Voice
*Voice ON
All alerts and instructions are communicated using a voice announcement.
Voice OFF
Only tones are used for alerts.
Alert Tones
*Tones MILD
This setting offers softer, simpler alert tones that are less obtrusive to the driving experience:
X-band, K-band, Ka-band, and Pop = Doorbell chime
o Low signal strength = Double chime
o High signal strength = Triple chime
o If alert remains in area more than 15 seconds = Single chime (as a reminder)
Laser = Solid brap tone (Since laser signals are a possible threat no matter how weak,
SmartRadar alerts you to all laser signals with a full laser alert.)
Tones CLASSIC
This setting uses the standard ESCORT radar alert tones:
X-band = beep tone
K-band = raspy brap tone
Ka-band = double brap tone
Pop = solid brap tone
Laser = solid brap tone
Bands
*Bands DFT
In this setting, the factory default settings for North America radar and laser are monitored. It is
highly recommended that you use your SmartRadar device in this mode.
Bands MOD
If the bands are changed from the factory default settings, SmartRadar will warn you with an audible
alert and associated text message that one or more bands have been turned off (e.g., "X-band
OFF"). This warning is displayed during the start-up sequence.
12