Selecting The Sound Mode - Samsung LW46G15W Owner's Instructions Manual

BN68-00746A(GAIA2_Euro_ENG)
English - 44
2004/08/23 03:55 PM

Selecting the Sound Mode

The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual I " or "Stereo", depending on
the current transmission.
➢
Page 44
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual I/II
Stereo
Stereo
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and automatic switching
occurs, switch to the Mono.
◆ When receiving mono sound in AV mode, connect to the
"AUDIO-L" input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the DUAL I-II button.
On-screen indication
Mono (Normal use)
NICAM ↔ NICAM
Mono
NICAM ↔
Mono
Stereo (Normal)
NICAM → NICAM → Mono
Dual I Dual II (Normal)
Mono (Normal use)
Dual I ↔ Dual II
Stereo ↔
Mono
(Forced mono)