Table of Contents
Advertisement
6E_body17p.fm
Page 33
Installing VESA compliant mounting devices
Refer to page 32 to fold the base.
Align the mounting interface pad with the holes in the rear cover mounting pad and secure it
with the four screws that came with the arm-type base, wall mount hanger or other bases.
Wall Mount Instructions
The following instructions apply to a hollow sheet-rock wall only Tools/Hardware
needed - Philips screwdriver, four toggle bolts, 5/8in dia. Drill bit and drill. Contact Ergotron at
(800) 888-8458 to purchase the triple pivot direct mount adapter and wall mount bracket kit.
• LW-15E23C (15") : No. 47 - 007 - 099 (Pivot direct mount adapter)
• LW-17E24C (17") : No. 47 - 007 - 099 - 02 (Pivot direct mount adapter)
Align the wall mount bracket on the wall at the desired height, making sure that the bracket
will be mounted between the wall studs. Mark the four corner openings and drill four 5/8-dia.
holes.
Assemble the wall mount kit according to the instructions provided with it.
Securely attach Ergotron's flat panel, triple pivot direct mount adapter to the back of the
TV/Monitor using the four 4mm, .7 pitch x 10mm screws provided with the arm.
Secure the assembly to the wall using four 3/16 by 3-inch long toggle bolts.
Wednesday, December 19, 2001
Appendix
Rear cover
mounting pad
No. 97 - 101 - 003 (Wall mount bracket kit)
No. 97 - 101 - 003 - 00 (Wall mount bracket kit)
English
4:50 PM
Mounting
33
Advertisement
Table of Contents
