1 Introduction The Velos VP1001 is a Velos component that is used to identify RFID tags on animals. The VP1101 is installed close to the spot where identification is required, for example on the animal feeder. 2 Description and functioning A VP1101 is connected to the CAN-bus and can identify tags on ISO frequency 134.2 kHz.
4 Installation 4.1 Mounting See the relevant equipment manual relating to where the VP1101 is to be installed. (e.g. feeder). 4.2 Connections Details VP1101 wiring Brown Input voltage 25 VDC, +20% -20% White Minus Green CAN high CAN low Yellow...
IP class IP 65. Always use a NEDAP power supply. The Nedap guarantee-regulations are only valid when is installed as indicated in this manual. Install data cables at a safe distance from (high) powered cables More information For more detailed information contact your local Nedap supplier or check the internet site.