Samsung LN3B460 Quick Setup Manual page 10

Samsung flat panel television quick setup guide
Table of Contents

Advertisement

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver
(Set-Top Box) via Component cables
TV Rear Panel
Component Cable
1
(Not supplied)

Audio Cable (Not supplied)
Connecting a VCR
TV Rear Panel
1
Video Cable (Not supplied)

Audio Cable (Not supplied)
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
TV Side Panel
VCR Rear Panel
English-10
1

or
or
Connect a Component Cable
between the COMPONENT IN (1 or
2) [Y, P
, P
] jacks on the TV and the
B
R
COMPONENT [Y, P
, P
B
R
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box).
Connect Audio Cables between the
COMPONENT IN (1 or 2) [R-AUDIO-L]
jacks on the TV and the AUDIO OUT
jacks on the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top
Box).
Component video separates the video into
Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality. Be sure
to match the component video and audio
connections. For example, if connecting a
Component video cable to COMPONENT IN
1, connect the audio cable to COMPONENT
IN 1 also.
Each DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) has a different
back panel configuration.
When connecting a DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to
the cable.
Connect a Video Cable
1
between the AV IN 1 [Y/VIDEO]
or AV IN 2 [VIDEO] jack on the
TV and the VIDEO OUT jack
on the VCR.
Connect Audio Cables between

the AV IN (1 or 2) [R-AUDIO-L]
jacks on the TV and the AUDIO
OUT jacks on the VCR.
If you have a 'mono' (non-stereo) VCR,
use a Y-connector (not supplied) to
connect to the right and left audio input
jacks of the TV. Alternatively, connect
the cable to the 'R' jack. If your VCR is
stereo, you must connect two cables.
Each VCR has a different back
panel configuration.
When connecting a VCR, match
the color of the connection
terminal to the cable.
When connecting to AV IN 1, the
color of the AV IN 1 [Y/VIDEO]
jack (Green) does not match the
color of the video cable (Yellow).
] jacks on the

Advertisement

Table of Contents
loading

Table of Contents