Brake Caliper Reassembly And Remounting; Rubber Parts; Piston Seals; Brake Caliper Holder - Suzuki Vinson LT-A500F Service Manual

RUBBER PARTS

Replace the removed rubber parts © with new ones.
B R A K E C A L I P E R R E A S S E M B L Y A N D
R E M O U N T I N G
Reassemble and remount the brake caliper in the reverse order
of removal and disassembly. Pay attention to the following
points:
• Wash the caliper bores and pistons with the specified brake
fluid. Thoroughly wash the dust seal grooves and piston seal
grooves.
|H Specification and classification: DOT 4
A C A U T I O N
* Wash the brake caliper components with new brake
fluid before reassembly.
* Do not wipe the brake fluid off after washing the
components.
* When washing the components, use the specified
brake fluid. Never use different types of fluid or
cleaning solvents such as gasoline, kerosine, etc.
* Replace the removed piston seals and dust seals
with new ones.
* Apply brake fluid to all of the seals, brake caliper
bores and pistons before reassembly.
PISTON S E A L S
• Install the piston seals © and dust seals © as shown.

BRAKE CALIPER HOLDER

• Apply SUZUKI SILICON GREASE to the brake caliper
holder.
99000-25100: SUZUKI SILICONE G R E A S E