Hard Drive Assembly - Dell Precision 3930 Rack Service Manual

3 Install the Top cover.
4 Follow the procedure in

Hard drive assembly

Removing the hard drive assembly
NOTE: The front accessible hard drive assemblies are not hot pluggable. If the hard drive assembly is removed when the system
is powered up data loss and system failure can occur.
NOTE: The hard drive assembly is applicable for both 2.5 inch and 3.5 inch hard drives. Only one type of hard drive can be
installed in a system. The 2.5 inch and 3.5 inch hard drives are not interchangeable.
1 Follow the procedure in
2 To remove the hard drive blank if replacing with a new hard drive.
a Press the release tabs on the sides of the blank and slide the hard drive blank out of the hard drive slot.
After working inside your computer.
Before working inside your computer.
Removing and installing components 25