Setting The Multi Control - Samsung HPL5025 Owner's Instructions Manual

Setting the Multi Control

Press the Menu button. Move the joystick up or
1
down to select the "SETUP", then press the joystick
to enter.
Move the joystick up or down to select the "Multi
2
Control", then move the joystick left or right to enter.
Enter ID setup number. The ID Setup operates by
3
using only the joystick or channel up/down buttons.
Move the joystick up or down to select the "ID
4
Input", The ID Input operates by using only the
numeric buttons.
Enter ID Input and the screen with the set ID number
5
will be switched to the Menu screen.
Note
• To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When
entering the ID Input number of PDP1 while the PDP is set in the ID Input mode, only PDP1 is
switched to the Menu screen and you can operate the remocon. At this time, PDP2 doesn't operate
with the remocon and displays the standby mode of ID Input. (See the figure of step 4.)
SETUP
Language English
Multi Control
Key Lock Off
Move Adjust Exit
SETUP
Language English
Multi Control
Key Lock Off
Move Adjust Exit
SETUP
ID Setup 0 1
ID Input _ _
Move Adjust Exit
SETUP
ID Setup 0 1
ID Input 0 1
Move Adjust Exit
61