Wall Installation Instructions - Samsung HPN4239 Owner's Instructions Manual

Wall Installation Instructions

Installation Notes
Do not install the PDP in any location other than a vertical wall.
1
To protect the performance of the PDP and prevent problems, avoid the following
2
places.
• Do not install next to smoke and fire detectors.
• Do not install in an area subjected to vibration.
• Do not install in an area subjected to high voltage.
• Do not install near or around any heating apparatus.
Use only recommended parts and components.
3
Parts
(Wall attachment panel is sold separately. Check with your dealer)
Wall attachment panel
Insulation holders ; 4 EA Screws ; 4 EA
14
Fixing the PDP panel to the wall attachment panel bracket
Remove the screws on the rear of the PDP panel.
1
Removing four screws
Connect Insulation holders to screws. (see the illustration below)
2
Tighten the screws connected to the Insulation holders on the rear of the PDP panel.
3
Connecting four screws
15