GE Profile PK7000SF Dimensions And Installation Information

8-3/4"
PK7000SF
F
Profile Series 27" Built-In Single Convection Wall Oven
™
DimenSionS anD inStallation inFormation (in incheS)
Note: These ovens are Not approved for
Conduit
stackable or side-by-side installations.
40"
Note: Cabinets installed adjacent to wall
ovens must have an adhesion spec of at least
Conduit
40"
a 194°F temperature rating. For 27" built-in
single ovens, if marks, blemishes or the cutout
D
opening is visible above the installed oven, it
may be necessary to add wood shims under
D
the runners and front trim until the marks or
"
22
openings are covered.
Note: Door handle protrudes 3" from door face.
"
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
INstallatIoN INformatIoN:
Before installing, consult installation
instructions packed with product for
2 x 4 or
equivalent runners
current dimensional data.
2 x 4 or
level with bottom of cutout
equivalent runners
and ush with sides of cutout
level with bottom of cutout
KW ratINg
or solid bottom oor.
and ush with sides of cutout
or solid bottom oor.
240V 3.6
208V 2.7
BreaKer sIze
240V 20 Amps
208V 20 Amps
Cutout depth
MAX.
23-1/2" MIN
Junction box
location
Cutout depth
23-1/2" MIN
Junction box
22" to
location
bottom of
junction box
22" to
Cutout width
25" MIN.
bottom of
25-1/4" MAX.
junction box
B
27''
Cabinet
Cabinet
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
B – Overlap of oven over side of edges of cutout
C – Overlap of oven at bottom of cutout
C – Overlap of oven at bottom of cutout
Oven
Oven
D – Install depth
D – Install depth
E – Overall height with trim
E – Overall height with trim
F – Overall width
F – Overall width
For answers to your Monogram,
or GE appliance questions, visit our website
®
at geappliances.com or call GE Answer Center
service, 800.626.2000.
Cutout width
25" MIN.
25-1/4" MAX.
A
E
Cutout height
B
27-5/8" MIN.
28-1/8" MAX.
C
A
Cutout height
27-5/8" MIN.
28-1/8" MAX.
C
Recommended
cutout location
from oor
Recommended
32-1/2"
23" minimum
cutout location
door opening
from oor
allowance
32-1/2"
27''
CK7000
PK7000
CK7000
JK5000
PK7000
JK3000
JK5000
PK7000
JK1000
JK3000
JK1000
27"
27"
1"
1"
1"
1"
1"
Suitable
1"
bracing
(must support 200 lbs.)
to support
runners
23-1/2"
23-1/2"
28-7/8"
28-7/8"
26-3/4"
26-3/4"
GE Profile
® ™
®
F
F
E
Conduit
40"
D
23" minimum
"
22
door opening
allowance
C L
C L
2 x 4 or
equivalent runners
level with bottom of cutout
and ush with sides of cutout
or solid bottom oor.
Suitable
bracing
(must support 200 lbs.)
to support
runners
8-3/4"
MAX.
Cutout depth
23-1/2" MIN
Junction box
Conduit
location
40"
22" to
bottom of
junction box
D
" B
22
2 x 4 or
equivalent runners
level with bottom of cutout
Cabinet
and ush with sides of cutout
A – Overlap of oven at top of cutout
or solid bottom oor.
B – Overlap of oven over side of edg
C – Overlap of oven at bottom of cu
Oven
D – Install depth
E – Overall height with trim
F – Overall width
Listed by
Underwriters
Laboratories
Specification Revised 5/15
Cuto
25
25-1/