Table of Contents
Advertisement
Setting up the tV with your PC
Preset: Press the SourCe button to select PC mode.
1. Press the menu button to display the menu.
Press the enter
. Select the required option by pressing the ▲ or ▼ button,
then press the enter
. When you are satisfied with your setting, press the
enter
button.
. Press the eXIt button to exit.
auto adjustment
♦
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
easy Setting
1. Press the toolS button on the remote control.
. Press the ▲ or ▼ button to select "Auto Adjustment", then
press the enter
♦
Screen adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Fine-
tuning alone, then adjust the frequency as best as possible
(coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the
center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then
press the enter
Press the ◄ or ► button to adjust the screen quality.
Press the enter
Position
Adjust the PC's screen positioning if it does not fit the TV
screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the enter
Image reset
You can replace all image settings with the factory default
values.
button, to select "Picture".
button.
button.
button.
button.
button.
english - 9
tV
Picture
mode
: Standard
backlight
Contrast
brightness
Sharpness
auto adjustment
Screen adjustment
Detailed Settings
Picture options
reset
: oK
move
enter
auto adjustment in Progress
Please wait.
tools
anynet+ (hDmI-CeC)
Picture mode
: Standard
Sound mode
: Custom
Sleep timer
: off
SrS tS Xt
: off
energy Saving
: off
PIP
auto adjustment
move
enter
tV
Screen adjustment
Coarse
Fine
Position
Image reset
move
enter
tV
Position
move
enter
tV
Screen adjustment
Coarse
Fine
Position
Image reset
move
enter
9
0
return
exit
0
return
return
0
return
Advertisement
Table of Contents
