Listening Through A Receiver (Home Theater); Troubleshooting For Anynet - Samsung 760 Series User Manual

Listening through a Receiver (Home theater)

You can listen to sound through a receiver instead of the TV speaker.
1 Press the TOOLS button.
Press the ENTER button to select Anynet+ (HDMI-CEC).
 Press the ▲ or ▼ button to select Receiver.
Press the ◄ or ► button to select On or Off.
 Press the EXIT button to exit.
➢ If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of
➢
the TV.
When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is
➢
displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is
a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the
Home Theater receiver.
➢ When using the WISELINK Pro feature, sound may not output properly through the receiver.
When listening through the receiver, there are restrictions for using the PIP and audio-related(MTS, Preferred
➢
language) menus.
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power
➢
failure), the Select Speaker may be set to External Speaker when you turn the TV on again. (see page 32)

Troubleshooting for Anynet +

Symptom
Anynet + does not work.
I want to start Anynet + .
I want to exit Anynet + .
The message Connecting to
Anynet + device... appears on the
screen.
The Anynet + device does not play.
The connected device is not
displayed.
The TV program cannot be
recorded.
The TV sound is not output through
the receiver.
Solution
■ C heck if the device is an Anynet + device. The Anynet + system supports Anynet + devices
only.
■ C onnect only one receiver (home theater).
■ C heck if the Anynet + device power cord is properly connected.
■ C heck the Anynet + device's Video/Audio/HDMI 1.3 cable connections.
■ C heck whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
■ C heck whether the TV remote control is in TV mode.
■ Check whether it is Anynet+ exclusive remote control.
■ Anynet+ doesn't work in certain situations. (Searching channels, Operating WISELINK)
■ W hen connecting or removing the HDMI 1.3 cable, please make sure to search devices
again or your TV off and on again.
■ Check if the Anynet+ Function of Anynet+ device is set on.
■ C heck if the Anynet + device is properly connected to the TV and check if the Anynet+
(HDMI-CEC) is set to On in the Anynet + Setup menu.
■ P ress the TV button on the TV remote control to switch to TV. Then press the TOOLS
button to show the Anynet + menu and select a menu you want.
■ S elect View TV in the Anynet + menu.
■ P ress the SOURCE button on the TV remote control and select a device other than Anynet +
menu.
■ P ress CH, CH LIST, PRE-CH, and FAV.CH to change the TV mode.
(Note that the channel button operates only when an Anynet + device with a built-in tuner is
not connected.)
■ Y ou cannot use the remote control when you are configuring Anynet + or switching to a view
mode.
■ U se the remote control when the Anynet + setting or switching to view mode is complete.
You cannot use the play function when Plug & Play is in progress.
■ Check whether or not the device supports Anynet + functions.
■ C heck whether or not the HDMI 1.3 cable is properly connected.
■ C heck whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
■ S earch Anynet+ devices again.
■ Y ou can connect an Anynet + device using the HDMI 1.3 cable only. Some HDMI cables may
not support Anynet + functions.
Check whether the antenna jack on the recording device is properly connected.
Connect the optical cable between TV and the receiver.
English - 1
View TV
Device List
Recording : DVDR
DVDR Operation
Receiver ◄ On ►
Setup
Move Adjust Return