Memorizing The Channels - Samsung 610 Series Quick Start Manual

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the
available channels are memorized, use the CH
need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Manager).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a
Cable system).
.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
button.
2.
Press the ENTER
Repeatedly press the ▲ or ▼ button to cycle through these choices: "Air", "STD", "HRC", or "IRC" (all cable TV)
Press the ENTER
STD, HRC and IRC identify various types of cable TV systems.
N
Contact your local cable company to identify the type of cable system that exists in your particular area.
At this point, the signal source has been selected
Storing Channels in Memory (Automatic Method)
.
First, select the correct signal source (Air, STD, HRC, or IRC).
2.
Press the ▲ or ▼ button to select "Auto Program", then press the ENTER
button.
3.
Press the ENTER
The TV will begin memorizing all of the available channels.
The TV automatically cycles through all of the available channels and stores
N
them in memory. This takes about one to two minutes. Press the ENTER
process and return to the "Channel" menu.
4.
After all the available channels are stored, the "Channel" menu reappears. Press the EXIT button to exit.
To stop the search before it has finished, press the ENTER
N
button.
button to select.
button to select "Start".
or CH button to scan through the channels. This eliminates the
button with "Stop" selected.
English - 4
TV
Air / Cable
Auto Program
Channel Manager
Fine Tune
Color System
Move
TV
Air / Cable
Auto Program
Channel Manager
Fine Tune
Color System
Move
button at any time to interrupt the memorization
Channel
: Air




: Auto

Enter Return
Channel
: Air




: Auto

Enter Return