I N M M O D - Nikon Autofocus Speedlight SB-22 Instruction Manual

I
In M Mode
1. Manually set the camera shutter speed to a flash
synchronization speed or slower speed.
2. Frame the background in the camera's vieMinder,
then turn on the camera's exposure meter to read
proper aperture for correct background exposure,
and set the aperture on the lens.
3. Calculate the flashto-subject distance using the
equation below and set the SB-22 at the calculated
t distance.
D
quide number*
I'
flash-to-subject = ---
-
I
ilstop
- For guide number, see page 42.
4. Set the SB-22's flash mode selector to M, turn on
the flash unit and take the shot.
I
F
Itr
,SrTft rei#J
W #i$ni !{r$+i iitrii *S i*W
ffit
tffi
iffiS 8SS ffi trffiS ffiS iiffi
ffi
Wg!
To eliminate harsh shadows caused by ambient
daylight, decrease flash illumination by one or
two f/stops using one of the methods below.
1. Use an aperture one or two f/stops smaller
than that determined in step 2 in combina-
tion with a shutter speed slower by one or
two steps.
2. Use a flash-to-subject
distance f rom 1.4 to
two times longer than that determined using
the eouation in steo 3.
& r r n n : n t : n f f i M W f f i w a w w * @
49