4.
4.1.
4.2.
4.3.
42
COM600 series, Version 5.1
Modbus Serial Slave (OPC) User's Manual
Operation
About this section
This section describes the basic operation procedures you can carry out after the object
properties for the Modbus Serial Slave OPC Client have been configured.
After this you can, for example, monitor and control the condition of connections in the
network. This is done by using the Online diagnostics function in SAB600.
Activating COM600 with new configurations
For information about activating COM600 with new configuration, see COM600 User's
Manual.
Modbus Serial Slave OPC Client diagnostics
To view version information on Modbus Serial Slave OPC Client or to monitor and
control the state of the client, right-click the Modbus Serial Slave OPC Client object and
select Online diagnostics, see Figure 4.3-1.
Figure 4.3-1 Modbus Serial Slave OPC Client Online diagnostics
In the Online diagnostics box you can:
•
reset Modbus Serial Slave OPC Client
•
view the event log file, see Figure 4.3-2
•
clear the event log file.
1MRS756913
Modbus_Serial_Slave_OPC_Client.png