Bulletin HY30-5503-M1/UK
Barrel retaining ring
One groove
2. When the barrel housing have one
groove assemble the cylinder barrel
as shown in picture 3.
Opening barrel
retaining ring
3. Assemble the cylinder barrel as
shown in picture.
1. Assemble the barrel retaining ring.
Note, grooves upwards as on picture.
Connection
ports A and B
Service Manual
Series F11
4. When the barrel housing have two
grooves assemble the cylinder barrel
as shown in picture 5.
Opening barrel
retaining ring
5. Assemble the cylinder barrel as
shown in picture.
11
Two grooves
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden