Special Vcr Playback Features; S-Vhs Playback; Variable Search System - Samsung DVD-VR329 Instruction Manual

Special VCR Playback
Features
While a videotape is playing, you can enjoy a variety of
special playback features, including Still, Frame Advance,
Skip, Slow motion, and more.
Pause
In Play mode, press √
II
a single frame.
Frame Advance
In Pause mode, press F.ADV/SKIP button to
advance to the next frame.
Fps/Review
In Play mode, press Forward (√√)button or Rewind
(œœ)button to Fps/review at two speeds:
• Picture Search - Press and release repeatedly to
advance the tape forward or backward at 2,3,5,7
times normal speed.
• Jet Search - Press and hold to advance the tape
forward or backward at 7 times normal speed.
Skip
In Play mode, press F.ADV/SKIP button to cue
ahead exactly 30 seconds. Press F.ADV/SKIP button
repeatedly up to 4 times to cue ahead 2 minutes.
Slow motion
In Pause mode, press √√ button for slow motion.
Press the √√ button repeatedly to vary slow motion
speed from 1/5 to 1/30 of normal playback. Press
the PLAY button twice to resume normal viewing.

S-VHS Playback

The DVD Recorder & VCR allows you to playback high
quality S-VHS tapes.
Insert an S-VHS tape into the VCR deck.
1
Press √
II
2 (PLAY/PAUSE) button on the remote
control or on the front panel to play a S-VHS tape.
56 - English
(PLAY/PAUSE)button to still
Variable Search
System
Each time you record a cassette on this DVD Recorder
& VCR, an "index" is automatically marked on the tape
when recording is started. The Search function allows
you to fast-forward or rewind to a specific index and
start playback from that point. Depending on the direc-
tion selected, the indexes are numbered as follows
• This DVD Recorder & VCR uses a standard indexing
system (VISS). As a result, it will recognize any index-
es marked by other VCRs using the same system and
vice versa.
Go To Zero
Use this feature when you want to search for the
0:00:00 counter position on a cassette.
1 Press the CANCEL button at the point on the tape
where you want to set the counter to 0:00:00.
While a cassette is stopped, press the ANYKEY
2
button.
VCR
Go To Zero
End Search
Forward Intro Scan
Reverse Intro Scan
MOVE SELECT
Press the ...† buttons to select Go To Zero, then
3
press the ENTER button.
The VCR will rewind or fast forward, searching for
the 0:00:00 counter position, and then automati-
cally stop at that position.
Go To Zero
➛ ➛
00:00:49