Advertisement
Expert
MINI-BEAM
®
®
Expert
MINI-BEAM
Prewired or QD wiring, 10 to 30V dc.
Users can choose 10 to 30V dc models with a 2 m (6.5') or 9 m (30')
attached, 5-conductor PVC potted-in cable, or a 5-pin Euro-style quick-
disconnect connector for easy sensor installation and removal. Keyed
connectors prevent wiring errors.
4
™
™
: Advanced features improve performance & make your job easier.
: Advanced features improve performance & make your job easier.
Remote programming for convenience and greater security.
Wherever they are mounted, one or more MINI-BEAM Expert sensors can
be easily wired to an external switch or PLC to enable remote programming
from a convenient location. Remote programming also assures greater
security for application settings because it can lock out the sealed
programming button, and there are no easily changed external switches.
Red, green or blue LED emitters.
The choice of a red, green, or blue LED light source in both
plastic and glass fiber optics, as well as convergent mode, gives
users the ideal sensing solution for maximum sensitivity to
any color, even low-contrast targets such as glass, or yellow ink
on a white background. This wide choice of models gives you
solutions to all your color mark applications.
Electrically protected.
The MINI-BEAM Expert withstands electrical problems
including reverse polarity, fast-transient and over-voltage.
It provides bipolar NPN and PNP (current sinking and
sourcing) outputs with a maximum rating of 150 mA (25°C)
to 100 mA (70°C).
Rugged and sealed.
MINI-BEAM Expert withstands difficult environments.
It's yellow glass-filled polyester housing is rugged,
and its electronics are completely
encapsulated in epoxy. The
environmentally sealed programming
button eliminates leakage and
tamper-prone access covers and
adjustments. It is rated IEC IP67
and NEMA 6.
Advertisement
