Hardware Overview - D-Link DIR-880L Quick Install Manual

Hardware Overview

1
7
1 Power LED
2 Internet LED
3 2.4G LED
4 5G LED
5 USB LED
6 SS USB LED
7
WPS Button
8 LAN Ports (1-4)
9 Internet Port
10
USB 2.0 Port
11
Reset Button
12 Power Button
13 Power Port
14
USB 3.0 Port
2 3
8
A solid blue light indicates a proper connection to the power supply. The
light will be solid orange during boot-up.
A solid blue light indicates a connection to the Internet port. If the LED
is orange, the connection is good but the router cannot connect to the
Internet.
A solid blue light indicates the 2.4GHz wireless function is working properly.
During the WPS process, this light will blink quickly. When used in Bridge mode,
the light will blink slowly when successfully connected to a wireless device.
A solid blue light indicates the 5GHz wireless function is working properly.
During the WPS process, this light will blink quickly. When used in Bridge mode,
the light will blink slowly when successfully connected to a wireless device.
A solid blue light indicates a USB 2.0 device is connected.
A solid blue light indicates a USB 3.0 device is connected.
Press to start the WPS process. The 2.4G or 5G LED will blink fast, depending
on which band the device is connecting with.
Connect Ethernet devices such as computers, switches, and game consoles.
Connect a broadband modem to this port using an Ethernet cable.
Connect a USB flash drive to share content throughout your network.
Port supports USB 2.0 devices.
Press and hold the reset button with a paper clip for six seconds to reset the
router to the factory default settings.
Press to power the router on and off.
Connect the supplied power adapter.
Connect a USB flash drive to share content throughout your network.
Port supports USB 3.0 devices.
4 5
9 10 11 12 13
6
14
3