Threading The Machine - Bernina Bernette b37 Instruction Manual

18

Threading the Machine

Raise the presser foot. Press the needle stop
up/down button
lever to its highest position.
CAUTION:
Turn OFF the power switch before threading the machine.
• Threading the Machine
Draw the end of the thread around the upper thread guide.
While holding the thread near the spool
the thread down around the check spring holder
Spool
Check spring holder
Firmly draw the thread up from right to left over the take-up
lever, and down into the take-up lever eye.
Pass the thread through the lower thread guide. Slide the
thread behind the needle bar thread guide on the left.
Thread the needle from front to back, or use the needle
threader.
to raise the thread take-up
Needle stop up/down button
, draw the end of
.