Table of Contents
Advertisement
STEP 2
Select 'YES' to select DHCP, and press 'OK' button.
Select DHCP?
YES
NO
STEP 3
After a while you'll be able to see the following screen
Reboot system?
YES
NO
4.4.2.1.3. PPPoE (ADSL) User
If you are a PPPoE / ADSL user, please go through the following setup, with the required user-id and
password in hand to configure on SiPTel IP Phone.
STEP 1
Select '3: PPPoE' to setup PPPoE / ADSL related parameters from 'NETWORK MODE'
under 'SETUP' menu.
<Network Mode>
2: DHCP
3:PPPoE
STEP 2
Enter the username / ID given by your ISP as ADSL ID.
?
<PPPoE Setup>
1: PPPoE ID
XXXXXXX
Use left arrow button from navigation keys to select 'YES' option and
press OK key.
Use left arrow button from the navigation key to select YES and
press OK button to reboot the IP Phone.
Press 3 or select '3: PPPoE using navigation keys and press OK
key.
Enter the User ID for ADSL / PPPoE given by your ISP.
SiPTel C01 IP Phone User Manual
Advertisement
Table of Contents
