Choosing A Connection - Samsung AK68-00141K User Manual

E138A 00141K-1(GB)XTC 4/9/03 10:21 AM

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are connecting for
more information on those particular components.
Connection to an Audio System
Method 1
AUDIO
SYSTEM
2ch Amplifier
Audio Input Jacks
DVD
PLAYER
e.g) DVD-P538K
Mixed Audio Out
20
Page 20
Method 2 Method 3
5.1ch Analog Amplifier Dolby Digital Decoder
Audio Input Jacks Digital Audio Input Jacks
OR
Analog Audio Out Digital Audio Out
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1 Method 2
Good
Basic Audio
picture picture
TV
S-Video
AV Cable
Cable
OR
DVD
PLAYER
Audio Output Jacks Video Output Jack S-Video Jack
DVD Player + TV with Video Input Jack
Method 1
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
DVD Player + TV with S-Video Input Jack
Method 2
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
DVD Player + TV with Component Video Jacks
Method 3
(The VIDEO OUT SELECT switch must be set to the 525i(480i) position.)
DVD Player + TV with Progressive Scan Jacks.
Method 4
(The VIDEO OUT SELECT switch must be set to the 525P(480P) position).
• If 525P(480P) VIDEO OUT is selected, VIDEO and S-VIDEO will not work.
• Depending on your TV, your hookup for Method 4 may differ from the illustration.
Important Note
Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User's Manual's instructions regarding Progressive Scan settings
in the TV's menu system.
(DVD-P538K only)
Method 3 Method 4
Better Best Optimum
picture picture
Video Cables
OR
Component Video Jacks Component Video Jacks
21