Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Genie Tech Pro Link
- Page 1 User Guide Tech Pro Link ™ First Edition Third Printing Part No. 1276689GT...
-
Page 2: Technical Publications
Changes or modifications not First Edition: Third Printing, August 2018 expressly approved by Terex USA Genie is a registered trademark of Terex LLC could void the user's authority South Dakota, Inc. in the U.S.A. and many to operate the equipment. -
Page 3: Safety Rules
applicable governmental Do not submerge or subject the regulations Tech Pro Link to pressurized fluids. To clean the Tech Pro Link, wipe You have the appropriate tools, with a damp cloth, using water or lifting equipment and a suitable workshop. -
Page 4: Kit Components
First Edition • Third Printing Safety Rules Kit Components Available Accessories The full boxed kit is P/N 1276686GT SmartLink retrofit harness • and includes: 1275740GT Tech Pro Link • User manual • 1276689GT USB cable • 1276688GT Wrist lanyard •... -
Page 5: Key Features
First Edition • Third Printing User Guide Key Features Article III. Key Features Directional arrow key pad, USB connection - Type A up/down, left/right, OK button USB access door Power, Home, Flashlight Lanyard attachment point buttons Databus harness connection Display point Flashlight 10 Magnet mounting surface... -
Page 6: Keypad Legend
User Guide First Edition • Third Printing Keypad Legend Article IV. Key pad Legend Keypad Function Legend Power Button Up Button Press and hold for 1 second to The Up key will move menu power on. Press and hold for 3 selection upward or increased seconds to power down. - Page 7 Model The full battery image is The model of the machine that displayed when battery charge the Tech Pro Link is connected is above 70% The battery charge symbol is Title bar displays the name of displayed when connected to a the selected menu.
-
Page 8: Settings Menu
User Guide First Edition • Third Printing Home Screen Legend Settings Menu Maintenance Menu Calibration System Information • • Speed / Threshold Real Time Machine Data • • Model and Option Selection • Battery Type • Feature Selection • Display Settings •... - Page 9 Equipment Databus Locations Connection Compatible Genie equipment will be The Genie Tech Pro Link includes a identified by the Tech Pro Link logo 4-pin connector in its handle for located next to one or more round 5 Power, Ground and CAN databus pin connection points.
-
Page 10: Usb Compatibility
Softwar e Ins tall ation USB Compatibility Select the File system drop down menu, select FAT32. Tech Pro Link only supports certain types of USB thumb drive file systems. If the incorrect file system is detected, an error message will occur, Try drive with FAT system. -
Page 11: Software Installation
Tech Pro Link Install a USB thumb drive into a USB-Type A connection port. PC or laptop. Note: The Tech Pro Link must be Launch a web browser on your turned off to enter Bootloader Mode. PC or laptop. Type in the... - Page 12 Remove the USB thumb drive from the PC or laptop and insert it into the Tech Pro Link USB-Type A connection port. Note: The Tech Pro Link must be turned off to enter Bootloader Mode. Press and hold the Power button for 3 seconds.
-
Page 13: Technical Specifications
First Edition • Third Printing User Guide Specifications Article VIII. Specific ati ons Technical Specifications -40 to +70 deg. C / -40 to +158 deg. F Storage Temperature -20 to +70 deg. C / -4 to +158 deg. F Operating Temperature 5V-30V @1A Input Voltage 4 Pin Connector Input Voltage USB Micro B... - Page 14 User Guide First Edition • Third Printing Notes Tech Pro™ Link Part No. 1276689GT...
- Page 15 First Edition • Third Printing User Guide This page intentionally left blank. ™ Tec h Pr o Li nk Part No. 1276689GT User Gui de First Edition • Thir d Pri nting Part No. 1276689GT Tech Pro™ Link...