Dynamic Range; Metering; (Functions) D-Range Exp - Samsung WB 5000 User Manual

Functions ( )

Dynamic range

The dynamic range can be set to an image
for shooting. When you use the dynamic
range, detailed expressions of dark areas
and bright areas can be achieved. The level
of brightness adjustment of [D-Range Exp.2]
is set higher than [D-Range Exp.1]
If the dynamic range is set too high, a noise may occur.

Metering

If you cannot obtain suitable exposure conditions, you can change
the metering method to take brighter pictures.
[Multi] (
D-Range Exp.
Back Move
[Spot] (
[Center We ighted] (
) : Exposure will be calculated
based on an average of
the available light in the
image area. However, the
calculation will be biased
towards the centre of the
image area. This is suitable
for general use.
) : Only the rectangular area in the centre of the LCD
monitor will be metered for light. This is suitable when
the subject in the centre is exposed correctly, regard-
less of the back lighting.
)
: Exposure will be calculated based on an average of
the available light in the image area. However, the
calculation will be biased towards the centre of the im-
age area. This is suitable for taking a picture of small
object like a ower or insects.
If the subject is not the centre of the focus area, do not use the
spot metering as this may result in an exposure error. In this
circumstance, it is better to use exposure compensation.

Metering

Back Move
051