Download Print this page
Dell KB813 User Manual

Dell KB813 User Manual

Smart card keyboard

Advertisement

Quick Links

Dell
KB813 Smart Card Keyboard
User Guide

Advertisement

loading

Summary of Contents for Dell KB813

  • Page 1 ™ Dell KB813 Smart Card Keyboard User Guide...
  • Page 2: Using The Keyboard

    Corporation in the United States and / or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. October 2015 Rev.A01...
  • Page 3 Introduction...
  • Page 4 The Dell Smart Card Keyboard can be used on PC systems running Windows 2000, Windows XP (32/64 bit), Windows Vista (32/64 bit), Windows 7 (32/64 bit), Windows 8 (32/64bit),...
  • Page 5 Back to Contents Page Setup NOTE: The drivers are already factory installed if the keyboard is purchased with computer. This section is included in case you have to re-load your operating system. Install the Keyboard Connect the Keyboard to any USB port on the computer. The USB port shown in the diagram is at the rear of the computer.
  • Page 6 Back to Contents Page System Requirements In order to properly install and operate your Dell Smart Card Keyboard, the following system requirements are necessary: • Windows 2000, Windows XP (32/64 bit), Windows Vista (32/64 bit), Windows 7 (32/64 bit), Windows 8 (32/64 bit),...
  • Page 7 Back to Contents Page Install the Windows XP driver 1. When the Dell Smart Card Keyboard is plugged into a USB port, the following window will appear: 2. Then the following window will appear: Install the Keyboard | Install the Windows XP driver | Install the Vista driver...
  • Page 8 Back to Contents Page 3. The installation wizard will install the driver. After a successful installation, the system will prompt you with the following message: 4. Select Finish. Your Smartcard Keyboard is now ready for use. Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver...
  • Page 9 Back to Contents Page Install the Vista driver 1. When the Dell Smart Card Keyboard is plugged into a USB port, the following window will appear: 2. Wizard will install driver. After a successful installation, the system will prompt you with the following message:...
  • Page 10 Back to Contents Page Install the Windows 7 driver 1. When the Dell Smart Card Keyboard is plugged into a USB port the following window will appear: 2. The installation Wizard will install driver. After a successful installation, the system will prompt you with the following message:...
  • Page 11 Back to Contents Page Install the Windows 8 driver 1. When the Dell Smart Card Keyboard is plugged into a USB port, the following window will appear: 2. The installation Wizard will install driver. During installation, the system will prompt you with the following window: 3.
  • Page 12 Back to Contents Page Install the Windows 10 driver 1. When the Dell Smart Card Keyboard is plugged into a USB port, the following window will appear: 2. The installation Wizard will install driver. During installation, the system will prompt you with the following window:...
  • Page 13 Back to Contents Page Update the Windows XP driver 1. With the Smart Card reader connected, the old driver that is built in inside the operating system will be installed automatically. 2. From the Start Menu, open the Control Panel. Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver...
  • Page 14 Back to Contents Page Update the Windows XP driver 3. Double click System. The following window will be shown: 4. Select Hardware. The following screen displays: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver...
  • Page 15 Back to Contents Page Update the Windows XP driver 5. Select Device Manager. 6. The following screen will be shown. Select Smart card readers. Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver Update the Windows 7 driver | Update the Windows 8 driver...
  • Page 16 Back to Contents Page Update the Windows XP driver 7. Right click on Smart Card Reader Keyboard. The display shows as follows: 8. Select Update Driver. Then, the following window will appear: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver...
  • Page 17 Back to Contents Page Update the Windows XP driver 9. Select Next. The wizard will install the driver. After a successful installation, the system will prompt you with the following message: 10 .Select Finish. Your device is ready to use. .Select Finish.
  • Page 18 Back to Contents Page Update the Windows Vista driver 1. With the Smart Card reader connected, the old driver that is built in inside the operating system will be installed automatically. 2. From the Start Menu, open the Control Panel: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver...
  • Page 19 Back to Contents Page Update the Windows Vista driver 3. Select System and Maintenance. 4. Select Device Manager. Then, the operating system will pop up the Windows needs your permission to continue dialog box. Click Continue to install. Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver...
  • Page 20 Back to Contents Page Update the Windows Vista driver 5. Select Smart Card readers. 6. Right click on USB Smart Card reader. 6. Right click on USB Smar T T he display shows as he display shows as follow follows: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver...
  • Page 21 Back to Contents Page Update the Windows Vista driver 7. Select Update Driver Software. 8. Select Browse my computer for driver software. 9. Insert the drivers CD into the CD/DVD drive, browse to Drivers folder, select Windows, and click Next. Drivers folder, select Windows, and click Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver...
  • Page 22 Back to Contents Page Update the Windows Vista driver 10. The installation wizard will install driver. After a successful installation, the system will prompt you with the following message: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver...
  • Page 23 Back to Contents Page Update the Windows 7 driver 1. With the Smart Card reader connected, the old driver that is built in inside the operating system will be installed automatically. 2. From the Start Menu, open the Control Panel. 3.
  • Page 24 Back to Contents Page Update the Windows 7 driver 4. Select Device Manager under System. The following screen displays: 5. Select Smart card readers. The following screen will be shown: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver...
  • Page 25 Back to Contents Page Update the Windows 7 driver 6. Click on your right button of the device. The display shows as follows: 7. Select Update Driver. Then, the following window will appear: will appear: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver...
  • Page 26 Back to Contents Page Update the Windows 7 driver 8. Insert the drivers CD into the CD/DVD drive, browse to the Drivers folder, select Windows, and click Next. 9. Select Next. The installation wizard will install the driver. After a successful installation, the system will prompt you with the following message, and the device is ready to use.
  • Page 27 Back to Contents Page Update the Windows 8 driver 1. With the Smart Card reader connected, the old driver that is built in inside the operating system will be installed automatically. 2. Open the Control Panel. 3. Double click System. The following window will be shown: 3.
  • Page 28 Back to Contents Page Update the Windows 8 driver 4. Select Device Manager under System. The following screen displays: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver Update the Windows 7 driver | Update the Windows 8 driver...
  • Page 29 Back to Contents Page Update the Windows 8 driver 5. Select Smart card readers and right click on the device. The device shows as follows: the device. The device shows as follows: 6. Select Update Driver, then the following window will appear: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver...
  • Page 30 Back to Contents Page Update the Windows 8 driver 7. Insert the drivers CD into the CD/DVD drive, browse to the Drivers folder, select Windows, and click Next. 8. The installation wizard will install the driver. After a successful 8. The installation wizard will insta installation, the system will prompt you with the following message installation, the system will promp and your device is now ready to use.
  • Page 31 Back to Contents Page Update the Windows 10 driver 1. With the Smart Card reader connected, the old driver that is built in inside the operating system will be installed automatically. 2. Open the Control Panel. e click Sy System. stem.
  • Page 32: Update The Windows 10 Driver

    Back to Contents Page Update the Windows 10 driver 4. Select Device Manager under System. The following screen displays: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver Update the Windows XP driver | Update the Vista driver Update the Windows 7 driver | Update the Windows 8 driver...
  • Page 33 Back to Contents Page Update the Windows 10 driver 5. Select Smart card readers and right click on the device. The device shows the device. The device shows as follows: as follows: 6. Select Update Driver, then the following window will appear: Install the Keyboard | Install the Windows XP driver | Install the Vista driver Install the Windows 7 driver | Install the Windows 8 driver Install the Windows 10 driver...
  • Page 34 Back to Contents Page Update the Windows 10 driver 7. Insert the drivers CD into the CD/DVD drive, browse to the Drivers folder, select Windows, and click Next. 8. The installation Wizard will install the driver. After a successful installation, the system will prompt you with the following message and your device is now ready to use.
  • Page 35 Back to Contents Page Using the Smart Card Keyboard Box Contents The Smart Card Keyboard includes the following items: Open the package and remove the contents to begin the installation. Box Contents | Connect Keyboard | Attach Palm Rest Inserting a Smart Card | LED indicator | The Windows Keys...
  • Page 36 Back to Contents Page Connect Keyboard • Connect the keyboard to any USB port on the computer. • The USB port shown in the diagram is at the rear of the computer. USB ports may also be located at the front. Box Contents | Connect Keyboard | Attach Palm Rest Inserting a Smart Card | LED indicator | The Windows Keys...
  • Page 37 Back to Contents Page Attach Palm Rest • As an option, you may attach the Palm Rest to the keyboard as shown. (picture need to be replaced with Cardinal one) Box Contents | Connect Keyboard | Attach Palm Rest Inserting a Smart Card | LED indicator | The Windows Keys...
  • Page 38 Back to Contents Page Inserting a Smart Card To insert a smart card in the Dell Smart Card keyboard, the side of the smart card with the metallic part (contacts) must face you. In the case of a credit card, your name must face you.
  • Page 39 Back to Contents Page LED indicator On the Dell Smart Card Keyboard, there are four LED indicators: • Three standard keyboard LEDs: Num Lock, Caps Lock, and Scroll Lock. • One additional LED (2 colors) to indicate the smart card...
  • Page 40 Back to Contents Page The Windows Keys and Applications Keys There are three specific keys on the keyboard for more convenient use, as described below. The two Windows logo keys located on the keyboard could be used in combination with other keys. Key Combinations Function One Application key...
  • Page 41: Diagnostics & Troubleshooting

    Back to Contents Page Diagnostic and Troubleshooting Diagnostics NOTE 1: The diagnostic program needs to be installed on your system from the CD. NOTE 2: Run this diagnostic software if you are having issues using smart cards with your application. It will be able to determine if the smart card software and hardware are loaded and functioning properly.
  • Page 42 Back to Contents Page Diagnostic and Troubleshooting 3. Click Next. 4. Read the agreement and then click Install. Diagnostics | Troubleshooting...
  • Page 43 Back to Contents Page Diagnostic and Troubleshooting 5. Then installation starts. 6. Installation completed. Diagnostics | Troubleshooting...
  • Page 44 Back to Contents Page Diagnostic and Troubleshooting 7. Click Finish. Run SmartDiag 2.4 1. Execute the diagnostic software SmartDiag. Diagnostics | Troubleshooting...
  • Page 45 Back to Contents Page Diagnostic and Troubleshooting 2. Click Start. 3. If no smart card is present, the above screen will appear. Insert a smart card and click Next. Diagnostics | Troubleshooting...
  • Page 46 Failed means the smart card driver or the hardware is not present or is not installed correctly. If this occurs, go to www.dell.com/support to resolve this problem. Smart Card Present: (when selected from the screen above) The above screen shows that the smart card is inserted and the system is able to read the smart card.
  • Page 47 Back to Contents Page Diagnostic and Troubleshooting Smart Card Removed When the smart card is removed, the above screen will appear. Diagnostics | Troubleshooting...
  • Page 48 Card Resource Manager has been successfully started, the smart cards should be accessible. On the next boot, the resource manager should auto start. The Dell Smart Card Keyboard LED goes solid green for a few seconds when I insert a smart card and then goes off again.
  • Page 49: Specifications

    Back to Contents Page Specifications General Manufacturer Liteon Model number KB813t Connection type Supported operating systems Microsoft Windows 2000, Microsoft Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10, Microsoft Windows Server 2003, Windows Server 2008, Microsoft Server 2012, Linux Ubuntu, OpenSuse and RedHat Keyboard interface Keyswitch feeling...
  • Page 50 Back to Contents Page Regulatory Regulatory Model : KB813t Regulatory Notices For additional regulatory information, see the Regulatory Compliance home page on www.dell.com at the following location: www.dell.com/ regulatory_compliance...
  • Page 51 Back to Contents Page Certifications Microsoft WHQL Logo The Dell Smart Card Keyboard/Reader has passed WHQL logo testing by Microsoft Windows Hardware Quality Labs. WHQL Logo is a certification provided by Microsoft Windows Hardware Quality Labs. This logo ensures that the hardware and accompanying software for the Dell Smart Card Keyboard are compatible with Microsoft Operating Systems.