Post Behavior - Dell OptiPlex 3060 Setup Manual

Small form factor
Hide thumbs Also See for OptiPlex 3060:
Table of Contents

Advertisement

Option
Block Sleep

Post behavior

Table 26. POST Behavior
Option
Numlock LED
Keyboard Errors
Fast Boot
Extend BIOS POST Time
Full Screen Logo
Warnings and Errors
Description
Disabled - Does not allows the system to power on by special LAN signals when it receives a
wake-up signal from the LAN or wireless LAN.
LAN or WLAN - Allows the system to be powered on by special LAN or wireless LAN signals.
LAN Only - Allows the system to be powered on by special LAN signals.
LAN with PXE Boot - A wakeup packet sent to the system in either the S4 or S5 state, that will
cause the system to wake-up and immediately boot to PXE.
WLAN Only - Allows the system to be powered on by special WLAN signals.
This option is Disabled by default.
Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default.
Description
Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Allows you to enable or disable the keyboard error reporting when the computer starts. The option
Enable Keyboard Error Detection is enabled by default.
This option can speed up the boot process by bypassing some compatibility steps:
Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or
the previous POST did not complete.
Thorough — The system does not skip any steps in the boot process.
Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to Thorough by default.
This option creates an additional pre-boot delay.
0 seconds (default)
5 seconds
10 seconds
This option will display full screen logo if your image match screen resolution. The option Enable Full
Screen Logo is not set by default.
This option causes the boot process to only pause when warning or errors are detected. Choose any
one of the option:
Prompt on Warnings and Errors
Continue on Warnings
Continue on Warnings and Errors
System setup
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents