Table of Contents
Advertisement
DIS-700G-28XS Industrial Layer 2+ Gigabit Managed Switch with 10G SFP+ slots Quick Installation Guide
LED STATUS INDICATIONS
LED Name
1. System Status Indicators
SYS
P1
P2
Alarm
RR (Ring Role)
RS (Ring Status)
2. Port Status Indicators
SFP port Link
(Ports 1 to 24)
SFP port Speed
(Ports 1 to 24)
SFP+ port Link
(Ports 25 to 28)
SFP+ port Speed
(Ports 25 to 28)
Additional Information
You can refer to the user manual or visit
Online Support
If there are any issues that are not in the user manual, please visit
direct you to your appropriate local D-Link support website.
Indicator /color
Condition
Solid green
The system is operating normally.
The system is booting up, the database is being saved, or a
Blinking green
remote download is in progress.
Off
The system is not working or is not receiving power.
Solid green
P1 power line has power.
Blinking green
P1 is being fed DC power through a single input pair.
Off
P1 power is disconnected or is not being powered.
Solid green
P2 power line has power.
Off
P2 power is disconnected or is not being powered.
Solid red
Alarm event has occurred.
Off
No alarm has occurred.
Solid green
One of three ring groups is set to Master is enabled.
Off
Ring groups are not set or are disabled.
Flash Green
Ring fail happen and detected.
Off
No ring fail detected.
Solid green
Link up.
Blinking green
Link up and there is traffic detected.
Off
Link down.
On
SFP port speed set to 1000 Mbps.
Off
SFP port speed set to 100 Mbps or no link detected.
Solid green
Link up.
Blinking green
Link up and there is traffic detected.
Off
Ethernet link down.
On
SFP port speed set to 10 Gbps.
Off
SFP port speed set to 1000 Mbps or no link detected.
http://support.dlink.com/
for more support.
http://support.dlink.com/
which will
8
Advertisement
Table of Contents
