Power Management Modes - Dell W2300 User Manual

Operating
Nonoperating
Thermal dissipation

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your PC, the LCD TV can automatically
reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If input from keyboard,
mouse or other input devices is detected by the computer, the LCD TV will automatically "wake up". The following
table shows the power consumption and signaling of this automatic power saving feature:
PC display power management mode
VESA Modes Video
ON Active
OFF Blanked
NOTE: In Power Saving Mode, Press Any Key on Keyboard or Move Mouse.
Activate the computer and 'wake up' the LCD TV to gain access to the OSD.
TV and Video Power Management Modes
Power management Definition
Display Video
ON Active
Stand by Blanked
Power switch off Active/Blanked
E
This monitor is NERGY
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
E S
NERGY TAR ® is a U.S. registered mark. As an
E S
meets the TAR ® guidelines for energy efficiency.
NERGY
3,657.6m (12,000 ft) max
12,192 m (40,000 ft) max
239BTU/hour (typical at PC model)
342 BTU/hour (typical at TV model))
Power Management Definition
H-sync V-sync
Yes Yes
No No
Power State
Always On
Off after 30minutes of no
signal
Off
S
TAR ®-compliant as well as TCO '99 power management
Power Used
70W (typical)
< 3 W
Power
Used
100W
(typical)
< 3W
< 1W
E S
NERGY TAR ® Partner, DELL has determined that this product
LED color
Green
Amber
LED color
Green
Amber
OFF