Starting play mode
Movie clip capture function
You can capture still images from the movie clip.
■ How to capture the movie clip
1. Press the Play / Pause button while playing the
movie clip. Then press the E button.
2. The paused movie clip is saved in a new file
name.
※ The captured movie clip file is the same size as
the original movie clip (800x592, 720x480,
640x480, 320x240).
※ When you press the E button at the beginning
of the movie clip, the first frame of the movie
clip will be saved as a still image.
On camera movie trimming
You can extract desired frames of movie clip during the movie clip play back.
If the running time is under 10 seconds, the movie clip can't be trimmed.
1. Press the Pause button at the point of the movie
2. Press the T button.
3. Press the Play & Pause button and the
Trim
Capture
T
E
4. Press the Play & Pause button once more at
[Paused]
5. Press the T button and a confirmation window
6. Select a desired sub menu by pressing the
[Press the E button]
clip where you want to start extracting.
extracted range will be displayed on the status
bar.
the point where you wish the extracted file to
stop.
will be displayed.
Up/Down button and press the OK button.
[No]
: The movie trimming will be cancelled.
[Yes]
: The extracted frames are saved as a
new file name.
● If you don't specify the ending point of the movie clip, the trimming
confirmation window will be displayed at the point of the last frame.
Trim
Capture
T
E
Trim
T
Trimming?
No
Yes
Confirm
OK
《63》