How To Use The Auto Mode; How To Use The Movie Clip Mode - Samsung DIGIMAX I5 User Manual

Starting the recording mode

■ How to use the Auto mode

Use this for shooting basic still images.
1. Select the [Full] sub menu on the [Mode] menu (p.24).
2. Select the Auto mode by pressing the M (Mode) button
(p.25).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button to capture an image.
INFORMATION
● If the auto focus frame turns to red when you press the shutter button down half way, it
means that the camera cannot focus on the subject. Should this be the case, the camera
is less likely to capture an image clearly.
● Avoid obstructing the lens or the flash when you capture an image.

■ How to use the Movie clip mode

A movie clip can be recorded for as long as the available recording time of the memory
capacity allows.
1. Select the [Full] sub menu on the [Mode] menu (p.24).
2. Select the Movie clip mode by pressing the M (Mode)
button (p.25).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button once and movie clips are
recorded for as long as the available recording time
allows. Movie clips will still be recorded if the shutter
button is released. If you wish to stop recording, press the shutter button again.
※ Image size and type are listed below.
- Image size
- Movie clip file type : AVI (MPEG-4)
《26》
: 640X480, 320X240, 160X128 (user selectable)
[AUTO mode]
[MOVIE CLIP mode]