Instructions On How To Use The Memory Card; ❾✃Maintenance Of The Memory Card; ❾✃Preserving The Memory Card Data - Samsung DIGIMAX A7 User Manual

Instructions on how to use the memory card

Maintenance of the memory card
❾➴ Be sure to format the memory card (see p. 78) if you are using a newly purchased memory
for the first time, if it contains data that the camera cannot recognize, or if it contains images
captured with a different camera.
❾➴ Turn off the camera power whenever the memory card is being inserted or removed.
❾➴ Repeated use of the memory card will eventually reduce the memory card's performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
❾➴ The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
❾➴ Do not store the memory card in an environment with strong electronic or magnetic fields,
e.g. near loud speakers or TV receivers.
❾➴ Please do not use or store in an environment where there are extremes in temperature.
❾➴ Do not allow the memory card to become dirty or to come into contact with any liquid.
Should this happen, clean the memory card with a soft cloth.
❾➴ Please keep the memory card in its case when not in use.
❾➴ During and after periods of extended use, you may notice that the memory card is warm.
This is perfectly normal.
❾➴ Do not use a memory card that is used in another digital camera or memory card reader.
❾➴ Do not use a memory card formatted by another digital camera or memory card reader.
Preserving the memory card data
❾➴ If the memory card is subjected to any of the following, the recorded data may become
corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting
(formatting) or reading.
❾➴ Samsung cannot be held responsible for lost data.
❾➴ It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
disks, CD etc.
❾➴ If there is insufficient memory available : If you press the shutter button for the shot, a [CARD
FULL !] message will appear and the camera will not operate. To optimize the amount of
memory in the camera, replace the memory card or delete unnecessary images stored on
the memory.
❾➓16❾➔