Sharpness
You can select the sharpness of still image.
1. Rotate the mode dial to the RECORDING mode and press the
MENU button.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [SHOOTING] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [SHOOTING] menu and the next
menu page will be displayed.
5. Select the [SHARP] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [SHARP] sub menu.
7. Select the desired sub menu by pressing the UP/DOWN button.
- SOFT
:
This gives smooth edges and the final image
will have a soft appearance.
- NORMAL :
This setting will give a standard finish to the
final image.
- VIVID
:
This will give the image a crisp and clear
appearance.
8. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
Take a picture.
INFORMATION
When the power is turned off, the changed setting value returns to the initial value.
58
PROG
SETUP
MyCAM
SIZE
2272x1704
QUALITY
FINE
METERING
MULTI
SHOOTING
SINGLE
EXIT:MENU
PAGE:
PROG
SETUP
MyCAM
ISO
W.B
SOFT
EFFECT
NORMAL
SHARP
VIVID
SET:OK
BACK: