Protecting Images - Samsung DIGIMAX 3000 User Manual

Starting the slide show
Configure slide show effects: Unique screen effects can be used for the slide show.
Steps 1 and 2 are the same as for the [INTERVAL] section.
3. Select the [EFFECT] sub menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Use the Up/Down Button to select the type of effect.
[CANCEL] : Normal display.
[EFFECT 1] : Image is displayed slowly.
[EFFECT 2] : Image is displayed slowly from the center
outwards.
[EFFECT 3] : Image moves from the top left.
[EFFECT 4] : The image slides diagonally from top left to bottom right.
5. Press the OK button to confirm the setting.
6. Press the OK button again and the slide show will start.

Protecting images

This is used to protect specific shots from being accidentally erased (LOCK).
It also unprotects images that have been previously protected (UNLOCK).
Protecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the
[PROTECT] menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SELECT] : Selection window for an image to be
protected/released is displayed.
Up/Down/Left/Right : Select an image
Zoom W/T Button : Protect/release the image
Menu Button : Your changes will be saved
[ALL PICS] : Protect/release all saved images
Zoom W/T Button : Protect/release the images
Menu Button : Your changes will be saved
and the menu will disappear.
and the menu will disappear.
SLIDE
INTERVAL CANCEL
REPEAT EFFECT1
EFFECT EFFECT2
BACK: SET:OK
PROTECT
SELECT
ALL PICS
EXIT:MENU MOVE:
W UNLOCK T
SET:OK
W UNLOCK T
SET:OK
55