Protect - Samsung DIGIMAX 300 User Manual

Setting up the play back function using the LCD monitor

Protect

This is used to protect specific shots from accidental erasing (LOCK).
It also releases images that have been previously protected (UNLOCK).
1. Rotate the mode dial to the PLAY mode and
press the MENU button.
2. Press the UP( )/ DOWN ( ) button and select
[PROTECT].
3. Press the SET( ) button and the sub menu will
display.
4. Select [LOCK] or [UNLOCK] by pressing the
UP( )/ DOWN (
SET( ) button.
- LOCK : Sets up the PROTECT function.
- UNLOCK : Discards the protect function.
5. When you protect an image, the protect indicator
will display on the LCD monitor.
Protect indicator
The unprotected image does not have indicator.
NOTICE
An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but
will NOT be protected from the [FORMAT] function.
56
) button and press the
PLAY
DELETE
SLIDE SHOW 2 SEC
PROTECT UNLOCK
# OF PRINTS
EXIT:MENU CHANGE:
PLAY
PROTECT
LOCK
UNLOCK
EXIT:MENU SET:
X1