Table of Contents
Advertisement
SETUP MODE
DATE IMPRINT
There is an option to include DATE/TIME on still images.
1. Turn the camera power on.
2. Select the SETUP mode by rotating the mode dial.
3. [SETUP 1/2] menu will be displayed.
4. Press the UP ( )/ DOWN ( ) button and select [DATE
IMPRINT].
5. Press the SET( ) button and the sub menu will be displayed.
6. Select [ON] or [OFF] by pressing the UP ( )/ DOWN ( )
button. Press the SET( ) button to confirm the setting.
7. The default is [ON].
INFORMATION
This function is not available in the movie clip
mode.
Date will be imprinted as DATE TYPE setting.
The DATE IMPRINT function is unaffected by the
camera being switched on and off.
The date can be set in [DATE SETUP].
Even though the [DATE IMPRINT] menu is set to
[OFF] , the date will be displayed on the LCD
monitor in the RECORDING(STILL IMAGE,
MOVIE CLIP) mode.
SETUP
1/2
BEEP
ON
POWER OFF
10 MIN
DATE IMPRINT
ON
DATE TYPE
YMD
MOVE PAGE:
SETUP
1/2
BEEP
ON
POWER OFF
10 MIN
DATE IMPRINT
ON
DATE TYPE
YMD
CHANGE:
SETUP
1/2
DATE IMPRINT
ON
OFF
EXIT:MENU
SET:
69
Hide quick links:
Advertisement
Table of Contents
