Advertisement
TR-CUT65CUS
OPERATING INSTRUCTIONS
Be sure to read instructions carefully, wear safety goggles, and keep fingers away from cutting
head.
NOTE: Connect tool to 10,000 PSI hydraulic pump.
CUTTING
1.
Fully retract the cutting blades.
2.
Place the wire between the cutting head jaws. Make sure all cuts are made perpendicular to
the cutting head.
3.
Advance the head.
CAUTION: always wear eye protection
while cutting
WARNING:
do not cut steel
4.
Once cut is complete, fully retract the cutting blades.
7
Advertisement
