Table of Contents
Advertisement
Camera settings menu
Normal setup 3(
)
3
Auto Select* : Convert between Main Display and EVF by eye sensor
Select
Main Display : The screen will be shown only through Main Display
Display
EVF : The screen will be shown only through EVF
Sensor Cleaning : Removes the dust of sensor when executing this menu
Start Up Action : If set, the dust of sensor is removed whenever turning on the power. (On, Off*)
Because this product uses interchangeable lenses, the sensor can get dust on it when
Sensor
you change lenses.
Cleaning
This can lead to dust particles appearing in the pictures you take. We recommend that
you do not change lenses when you are in a particularly dusty area. Also, make sure to
attach the lens cap to the lens when not using it.
Select the video output signal appropriate for your country when connecting the camera to an
external video device such as a monitor or TV.
Video
NTSC* : US, Canada, Japan, Korea, Taiwan, Mexico, etc.
Out
PAL (supporting only the BDGHI method) : Australia, Austria, Belgium, China, Holland, Finland,
Germany, England, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway, etc.
When you connect the camera to an HDTV that supports Anynet+ (HDMI-CEC), you can
Anynet+
control the play function of the camera with the TV remote controller (CD-ROM User manual,
(HDMI-
page 90).
CEC)
On* : You can control the play function of camera with the TV remote controller.
Off : You can NOT control the play function of camera with the TV remote controller.
84
* Default value
Advertisement
Table of Contents
