Serial Com Port; Video Display Port; Field Agent Port - GE PACSystems RX3i CPE400 Quick Start Manual

Serial COM Port

The RJ45 port marked COM is located on
the underside of the CPE400, as shown
in Figure 2. This port is not currently
supported.

Video Display Port

The Display Port is located on the
underside of the CPE400, as shown in
Figure 2. It provides signals for
connecting either a suitable monitor or
video adapter to the unit. This port is
not currently supported.

Field Agent Port

The RJ45 port marked EFA is located on the underside of the CPE400, as shown in
Figure 2. This is an Ethernet port pre-configured to connect securely to the Predix
cloud environment. For additional information concerning use of this port, refer to the
PACSystems RX7i, RX3i and RSTi-EP CPU Reference Manual, GFK-2222Y or later. For
more detailed information regarding Field Agent, refer to the Field Agent User's Guide,
GFK-2993.
The FAOK LED, located on the front panel, indicates the status (page 6) of the Field
Agent interface.
Only the 24Vdc In Connector is shipped with the CPE400.
2
GFK-3002A
Figure 2: Underside Ports & Connectors
October 2017
2
8