Table of Contents
Advertisement
O
P E R AT I O N
Deactivating the Automatic Execution of Self Focus
Once set, the "Self Focus" feature starts on default. It will automatically begin 10 minutes after
switching on the power and the appearance of the screen image. To set the optimum picture
quality, the "Self Focus" will automatically begin again after another 30 minutes, as the screen
image is then fully stabilized.
1
Press the MENU button.
Press the ▲ or ▼ button
to select "Picture", then
press the ENTER button.
2
Press the ▲ or ▼ button
to select "Self Focus",
then press the ENTER
button.
Press the ▲ or ▼ button
to select "Auto Perform",
then press the ENTER
button.
To turn off the automatic
execution of the self
focus feature, select
"Off" by pressing the ...
or † button, then press
the ENTER button.
Removing the "Self Focus" Message from the Display
3
Press the ▲ or ▼ button
to select "Message
Display", then press the
ENTER button.
To remove the message
"Self Focus" and
horizontal bar on the
screen during the self
focus process, select
"Off" by pressing the ...
or † button, then press
the ENTER button.
Press the EXIT button to
exit.
Picture
Input
Mode
: Dynamic
Size
: 16:9
Picture
Self Focus
Manual Convergence
Sound
Film Mode
: Off
Channel
Setup
Guide
Move
Enter
Self Focus
Input
Self Focus
Auto Perform
: On
On
Picture
Message Display : On
Off
Sound
Channel
Setup
Guide
Move
Enter
Self Focus
Input
Self Focus
Auto Perform
: On
Picture
Message Display : On
On
Off
Sound
Channel
Setup
Guide
Move
Enter
English - 28
√
√
√
√
√
Return
Return
Return
Advertisement
Table of Contents
