Connecting A Camcorder - Samsung CL25M5MQ Owner's Instructions Manual

I
N S TA L L AT I O N

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see "Viewing an External Signal
Source" on page 37)
3
Connect a video cable
between the VIDEO
OUTPUT jack on the
camcorder and the
VIDEO terminal on the
side of the TV.
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
18
1
Locate the A/V output
jacks on the camcorder.
They are usually found
on the side or back of
the camcorder.
2
Connect an audio cable
between the AUDIO
OUTPUT jack on the
camcorder and the
AUDIO terminals on the
side of the TV.
Camcorder
Output Jacks
Camcorder
Output Jacks
Audio Cable
Camcorder
Output Jacks
Y-Connector
Video Cable
TV Side Panel
TV Side Panel