Samsung SPH-I325 User Manual page 27

•
View: Allows you to filter your onscreen list of numbers by one of
three criteria: Calls and Contacts, All Calls, or Speed Dial.
• The Speed Dial filter allows you to enter a number (1-99) and
then display any speed dial entries which match the specified
speed dial location. Press
"Assigning Speed Dial Numbers" on page 58.)
Tip: To speed dial a phone number from standby mode, press and hold the speed
dial number. If the speed dial number is two digits, enter the first digit, and then
press and hold the second digit. (This feature will not work when you are roaming
off your service provider's network; when roaming you must dial using eleven
digits [1 + the area code + the seven-digit phone number.])
Answering Calls
1. Make sure your device is on.
Press
2.
– or –
Press Answer (left softkey). (Depending on your settings, you may also
answer incoming calls by pressing any number key. See "Call Options"
on page 36 for more information.)
Your device notifies you of incoming calls in the following ways:
•
The device rings or vibrates.
•
The backlight illuminates.
•
The screen displays an incoming call message screen.
If the incoming call is from a number stored in your Contacts, the associated name
is displayed. If the incoming caller is not stored in your Contacts list, only the
phone number is displayed. The caller's assigned image may also be displayed, if
available.
For all incoming calls, the following options are displayed. To select an option,
press the corresponding softkey.
•
Answer to answer the incoming call. (This is the same as pressing
•
Ignore to send the call to your voicemail box. (This is the same as pressing
.)
to answer an incoming call.
to dial the speed dial number. (See
Phone Basics 19
.)