Adjusting the Monitor
Direct Functions
Note
•
The monitor LED displays for 10 seconds
•
Press the MENU button four times continuously to exit OSD
AUTO
When no OSD is displayed,press" " button to perform the AUTO function,the auto adjustment
screen appears as shown in the animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal.
If auto adjustment does not work properly, press " " button again to adjust picture with
more accuracy.
If you change resolution in the control panel, auto function will be executed automatically.
Brightness
When no OSD is displayed,press" " button to perform the Brightness function.
OSD Functions
Brightness
MagicBright Custom
Image Size Auto
Language
Exit
Brightness
(Not available in MagicBright mode of Dynamic Contrast.)
You can use the on-screen menus to change the brightness according to personal prefer-
ence.
NotePC
Internet
Wide
Movie
Dynamic
Contrast