Auto Adjustment - Samsung SYNCMASTER 460DRN-A User Manual

→ , → ENTER
Removes noise such as vertical stripes. Coarse adjustment may move the screen image
area. You may relocate it to the center using the horizontal control menu.
Fine
MENU →
ENTER → [Fine]
→ , → ENTER
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat
it after adjusting the frequency (clock speed).
H-Position
MENU →
→ ENTER → [H-Position]
→ , → ENTER
Adjusts the screen location horizontally.
V-Position
MENU →
→ ENTER → [V-Position]
→
→ , → ENTER
Adjusts the screen location vertically.

Auto Adjustment

MENU →
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in PC mode only)
(Not available in Dynamic Contrast mode of On.)
Note
The direct button on the remote control is the 'AUTO' button.
Adjusting the LCD Display
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ → → ENTER → [Image Lock] →
→
→ → → ENTER → [Image Lock] →
→
→ → → ENTER → [Image Lock] →
→
→ → → ENTER → [Auto Adjustment ]
→ →
→
→
→