Samsung SyncMaster 320MX-2 Quick Start Manual page 10

18. SOURCE
19. ENTER/PRE-CH
20. CH/P
21.D.MENU
22.GUIDE
23. RETURN
24. Up-Down Left-Right but-
tons
25. EXIT
26. SRS
27.MagicInfo
28. P.MODE
29. DUAL/MTS
Introduction
Press the button to change the input signal SOURCE.
Changing the SOURCE is only allowed for external devices
that are connected to the LCD Display at the time.
This button is used to return to the immediately previous
channel.
In TV mode, selects TV channels.
DTV menu display
Electronic Program Guide (EPG) display.
Returns to the previous menu.
Moves from one menu item to another horizontally, vertically
or adjusts selected menu values.
Exits from the menu screen.
Selects SRS TruSurround XT mode.
MagicInfo Quick Launch Button.
When you press this button, current picture mode is dis-
played on the lower center of the screen.
AV / HDMI / TV : P.MODE
The LCD Display has four automatic picture settings that are
preset at the factory. Then push button again to circle
through available preconfigured modes. ( Dynamic →
Standard → Movie → Custom )
PC / DVI / MagicInfo: M/B (MagicBright)
MagicBright is a feature providing the optimum viewing en-
vironment depending on the contents of the image you are
watching. Then push button again to circle through available
preconfigured modes. (Entertain → Internet → Text → Cus-
tom )
DUAL-
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote
control while watching TV.
MTS-
You can select MTS (Multichannel Television Stereo) mode.
Audio Type
FM Stereo Mono
Stereo
MTS/S_Mode Default
Mono Manual
Change
Mono ↔ Stereo