Safety And Maintenance Guidelines: Hp W19 Lcd Monitor; Important Safety Information; Safety Precautions - HP w19 User Manual

Back to Contents Page

Safety and Maintenance Guidelines: HP w19 LCD Monitor

Important Safety Information

Important Safety Information
The power cord is designed for use with your monitor. To use a different cord, use only a power source and
connection compatible with this monitor. For information on the correct power cord set to use with your monitor, see
Power Cord Set Requirements.
WARNING: To reduce the risk of electric shock or damage to your equipment, do not disable the
power cord grounding feature. The grounding plug is an important safety feature. Connect the
equipment to a grounded (earthed) power outlet.
WARNING: For your safety, be sure that the grounded power outlet you plug the power cord into is
easily accessible to the operator and located as close to the equipment as possible. To disconnect
power from the equipment, unplug the power cord from the power outlet by grasping the plug
firmly. Never pull on the cord.
CAUTION: To protect your monitor, as well as your PC, connect all power cords for your PC and its
peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a
power strip with surge protection or uninterruptible power supply (UPS).
Not all power strips provide surge protection; the power strips must be specifically labeled as
having this ability. Use a power strip whose manufacturer offers a damage replacement policy so
you can replace your equipment if surge protection fails.

Safety Precautions

•
Avoid applying pressure to the LCD screen; doing so can cause damage.
•
Use only a power source and connection compatible with this monitor, as indicated on the label/back plate of the
monitor.
•
Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the
electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the
cord. Look on the power label to determine the ampere rating (Amps or A) for each device.
•
Install your monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and
pulling it from the outlet. Never disconnect the monitor by pulling the cord.
•
Do not allow anything to rest on the power cord. Do not walk on the cord.
• Safety Precautions • Maintenance Guidelines • Cleaning the Monitor