Rear Panel - Samsung PPM42M6H Owner's Instructions Manual

Rear Panel

a) POWER IN
Connect the supplied power cord.
b) EXT SPEAKER (8Ω)
Connect external speakers.
c) DVI/PC AUDIO IN
Connect to the audio output jack on your
PC or DVI.
➢
AUDIO is an audio input jack for PC1 and PC2
modes.
d) DVI IN
Connect to the video output jack for device with
DVI output.
e) PC IN1/PC OUT1
- PC IN1
: Connect to the video output jack on
your PC.
- PC OUT1
: Connect to the video input jack on
external devices.
f) PC IN2 (BNC)
Connect for RGB HV video signal input from the PC.
➢
"PC Mode" from this page onward means
PC1/PC2 mode using RGB1(PC1) and
RGB2(PC2).
➢
For further details about connection, refer to pages 39~42.
➢
Whenever you connect an audio or video system to your PDP Display, ensure that all elements are
switched off. Refer to the documentation supplied with your equipment for detailed connection
instructions and associated safety precautions.
g) RS-232C
- IN
: Used for the MDC function when connecting
PC or RS-232C output of another PDP
Display.
- OUT
: Used for the MDC function when
connecting with RS-232C input of another
PDP Display.
➢
For further details about connections, refer to
Page 12.
h) COMPONENT IN
Video (Y/P /P ) and audio (L/R) inputs for
B R
component.
i) AV (VIDEO/AUDIO L/R)
- IN
: Video and audio inputs for external devices,
such as a camcorder or VCR.
- OUT
: Outputs for external devices.
j) S-VIDEO IN
Video input for external devices with an S-Video
output, such as a camcorder or VCR.
English - 7