Radio - Pioneer SPH-C10BT Operation Manual

Menu Item
UPDATE
[S/W VER], [START]
RESET
[YES], [NO]

Radio

Receiving preset stations
1
Press to select [RADIO].
2
Press to select the band from [FM1], [FM2], [FM3], [AM], [SW1] or [SW2].
3
Press or .
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [P.CH] in the
FUNCTION settings (page 22).
Best stations memory (BSM)
The six strongest stations are stored then select the channel by pressing / .
1
After selecting the band, press and hold
2
Press to select [FUNCTION], then press
3
Press to select [BSM], then press
To seek a station manually
1
After selecting the band, press / to select a station.
Press and hold / then release to seek an available station. Scanning stops when
the unit receives a station. To cancel seek tuning, press / .
NOTE
[SEEK] needs to be set to [MANUAL] in the FUNCTION settings (page 22).
Description
Select [S/W VER] to confirm the latest system information on the
unit.
Select [START] to update the unit to the latest software and
initialize the unit settings. For details on the latest software and
updating, visit our website.
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
to confirm.
- 12 -
to display the main menu.
to confirm.